— Reservation hotline—15175713336
中文版
Product display
Current location:Home page--New pendulum tester
New pendulum tester
New pendulum tester
The new deflection tester: with a pair of Morse 4# hard top, to improve the measurement accuracy of deflection instrument, increase support for the weight of the workpiece to be measured, capable of measuring high precision parts, radial and oblique end face runout.
Supplier:Cangzhou Bozhong Heavy Industry Machinery Equipment Co., Ltd.
Sales Hotline:15175713336

  The new deflection tester: with a pair of Morse 4# hard top, to improve the measurement accuracy of deflection instrument, increase support for the weight of the workpiece to be measured, capable of measuring high precision parts, radial and oblique end face runout. The table rack equipment is exquisite and reasonable. The upper and lower, front and back, left and right regulation are smooth and free, the operation is convenient, the steel of the table rack is good, and the sensitivity of the detecting instrument is improved.

  Application: mainly used for the radial, roundness and end face accuracy of shaft and disc parts.

  Main technical parameters of new deflection pendulum tester:

  1 、 radial gyration accuracy: 0.001mm

  2, the side rail on the length of the top edge of the two parallel degrees: 0.005mm (A03), 0.008mm (A05), 0.02mm (A10)

  3 、 the maximum diameter of the tested part is 250mm

  4, the measured parts of the maximum length of 300mm, 500mm, 1000mm