— Reservation hotline—15175713336
中文版
Product display
Current location:Home page--Cast iron pendulum tester
Cast iron pendulum tester
Cast iron pendulum tester
Cast iron deflection tester is an electronic measuring instrument, shaft and sleeve parts of the disc runout, top with a hardness on the Mohs 4#, to improve the measurement accuracy of the new deflection tester, how big to support the weight of the workpiece to be measured, capable of measuring high precision parts, end face and radial oblique circular runout.
Supplier:Cangzhou Bozhong Heavy Industry Machinery Equipment Co., Ltd.
Sales Hotline:15175713336

  Cast iron deflection tester is an electronic measuring instrument, shaft and sleeve parts of the disc runout, top with a hardness on the Mohs 4#, to improve the measurement accuracy of the new deflection tester, how big to support the weight of the workpiece to be measured, capable of measuring high precision parts, end face and radial oblique circular runout.

  Cast iron pendulum tester, the design of the table is exquisite and reasonable, the upper and lower, front and rear, left and right regulation of smooth and comfortable, easy to operate, table rack rigidity, and improve the sensitivity of the detection instrument.

  Application: it is widely used in the measurement of shaft, disc and parts, and mainly detects its radial runout, ellipticity and end face accuracy error. Advantages: using granite instrument base to improve the accuracy of the base plane, reducing the accuracy error of the instrument itself.

  The movable watch can be measured at any position of the instrument seat.

  The instrument is not rusty, convenient for use and storage.

  How to use: tighten the eccentric shaft handle, first fix the fixed top seat on the instrument seat. The movable center seat is fixed in a suitable position according to the length of the part being measured. Press down the handle of the ball head, load the parts and center the hole with the two spire. Tighten the handle firmly and fix the center. Place the movable watch table in the desired position. With 100% wheat (1000 minutes wheat) can be tested.

  High precision pendulum tester

  Brief introduction: the main instrument for the detection of shaft parts, radial disc type high precision, circular runout and inclined to the end of the round beating, high precision, with a Mohs 4# hard top, improves the precision of measuring deflection instrument, increased by supporting weight side parts. The surface design is accurate and reasonable, the operation of the rack operation, up and down, front and rear, left and right regulation, smooth and comfortable, easy to operate, table rack steel, and improve the sensitivity of testing equipment, especially suitable for grinding products